Categories
Contact Us
Advanced Equipment Industrial Park, Beibaibu Village, Luoxi Street, High-tech Industrial Development Zone, Linyi City, Shandong Province, China
Wooden board bevel seal
Product Description
Basic Parameters
Item | Specification |
| Model | ZX-678X |
| Panel Length | ≥ 150 mm |
| Panel Width | ≥ 80 mm |
| Panel Thickness | 10 – 40 mm |
| Edge Band Width | 12 – 45 mm |
| Edge Band Thickness | 0.4 – 3 mm |
| Feed Speed | 12–23 m/min (max up to 18 m/min) |
| Total Power | 10 kW |
| Power Supply | 380 V, 3-phase, 50 Hz |
| Output Frequency | 200 Hz |
| Air Pressure | 0.6 MPa |
| Working Table Height | 800 mm |
| Dust Extraction Port | Φ125 mm |
| Machine Dimensions(L×W×H) | 5,500 × 800 × 1,600 mm |
| Machine Weight | 2,000 kg |
Key Equipment Features
Specifically designed for simultaneous bevel (45°) and straight edge banding, achieving one-pass forming without secondary processing.
Compact and flexible design with a stable system and intelligent operation control, ideal for batch production of panel furniture.
Built with high-quality materials and branded components, suitable for various production environments, offering durability, low maintenance, and high reliability.
Frame constructed from laser-cut steel plates and integrally welded for excellent structural rigidity and smooth operation.
Complete Processing Sequence
Process Step | Function Description |
| Bevel Forming | Use a 45 ° sawing device to mill straight edge boards into a 45 ° inclined surface in one go |
| IR Heater | Preheat the board and edge banding to enhance the bonding strength |
| Edge Band Grooving | Mark grooves at the bend of the edge banding to facilitate fitting with the beveled edge |
| Bevel Gluing | Apply hot melt adhesive to the inclined surface |
| Straight Gluing | Apply hot melt adhesive to straight edges |
| Straight Pressing → Simultaneous Bevel & Straight Pressing | High precision laminating wheel ensures smooth edge banding and tight adhesion |
| Bevel Trimming | Trim the beveled edge and seal the upper and lower edges of the edge tape to be level with the board surface |
| End Trimming | Accurately cut off excess edge banding before and after, with a smooth cut surface |
| Scraping | Remove surface knife marks and excess glue |
| Cleaning → Polishing | Clean and polish the edges to enhance the aesthetic appeal of the finished product |
Key Component Brands
Component | Brand |
| Air Treatment Unit | Airtac |
| Pressure Switch | Airtac |
| Pressure Regulator | SMC |
| Limit Switches | Honeywell / TEND |
| Solenoid Valves | Airtac |
| PLC | Weico |
| Relays/Contactors | ABB |
| Inverter | Weico |
| High-Speed Motors | CC |
| Drive Motors | TUO |
Note:The ZX-678X is a rare compact automatic machine in China dedicated to simultaneous bevel and straight edge banding, especially suitable for modern custom furniture featuring 45° mitered door panels and
Next:
PRODUCTION SCENE
Customer visit
Packaging for shipment
Related Products
Related Products
CNC Woodworking Machines
Automatic Edge Banding Machine
CNC Router Machine
CNC Six side Drilling Machine
CNC Panel Saw Machine
45 ° beveled edge sealing series
-
Aluminum Honeycomb Panel Beveled Edge Seal
Made with high-quality materials and featuring brand-standard configurations, it can adapt to various environments for production operations, offering characteristics such as stable performance, low maintenance requirements, and exceptional durability.
-
Wooden board bevel seal
Specifically designed for simultaneous bevel (45°) and straight edge banding, achieving one-pass forming without secondary processing.
High speed wood edge banding machine series
Aluminum honeycomb board track edge banding machine series
-
ZX-876
Fully automatic high-speed conveyor-type design, suitable for mass production of wood panels, carbon crystal boards, PVC boards, bamboo-kun boards, and panel furniture.
-
ZX-896
Stable and powerful system with intelligent control for high-speed, high-efficiency operation.
-
ZX-896T
Suitable for the mass production of various types of boards (wood, honeycomb panels, carbon crystal boards, PVC panels, bamboo-kun boards, and panel furniture).
Mini Edge banding Machine Series
-
ZX-365
Equipped with Kunlun Tongtai touchscreen for start/stop, function selection, parameter setting, and alarm notifications.
-
ZX-365J
Pre-milling → Gluing → Pressing → Front & Rear End Trimming → Fine Profiling → Scraping → Polishing
-
ZX-465
Gluing → Pressing → Front & Rear End Trimming → Fine Profiling → Dual-Motor Contour Tracking Corner Trimming → Scraping → Polishing
Wooden edge banding machine series
-
ZX-368
Laser-cut steel plates welded into a single structure—ensures stability, smooth operation, and long service life.
-
ZX-468
Laser-cut steel plates welded into a single structure—ensures dimensional stability under high-intensity batch production.
-
ZX-568
One driven + three idler rollers (two conical + two straight)—ensures full-contact adhesion without lifting.
Intelligent Laminating Equipment
-
PUR Laminating Machine
Infrared preheating machine uses photoelectric probe induction heating, automatically shuts down when no panels to save energy;
-
Glue Spraying Machine
User-configurable glue mixing ratio and real-time adjustable glue output, suitable for processing needs of different specifications of aluminum honeycomb panels.
Aluminum Honeycomb Panel Machinery
-
Glue Spraying Machine
User-configurable glue mixing ratio and real-time adjustable glue output, suitable for processing needs of different specifications of aluminum honeycomb panels.
-
Aluminum Honeycomb Core Stretching Machine
Maximum stretching width of 1500mm, length of 3200mm and thickness of 50mm, which can meet the processing needs of various specifications of aluminum honeycomb cores and adapt to different production scenarios of aluminum honeycomb panel products.
-
Cold Press Machine
Equipped with pallets of exclusive sizes, facilitating the transportation and positioning of panels during the pressing process and reducing manual handling intensity; sufficient press plate opening distance and processing space ensure convenient and.
-
Edge Trimming Machine
Integrates longitudinal/transverse saw cutting, infrared positioning and automatic stacking functions, fully controlled by PLC without manual intervention, greatly saving labor costs and improving production efficiency.
-
Hot Press Machine
Furniture manufacturing, interior decoration, building facades, transportation interiors, lab countertops, display fixtures, pallets, etc.
Gypsum Building Material Machinery
-
PVC Gypsum Ceiling Tile Making Machine
High Automation: Fully automatic from board feeding, lamination, cutting, edge taping, packing to stacking—no manual intervention required.
-
Gypsum Cornice Making Machine
50-Meter Automatic Gypsum Cornice Production Line
-
Board Punching Machine
Automatic Punching Machine for Gypsum Board, Fiber Cement Board, Bamboo-Wood Fiber Board, Magnesium Oxide Board, etc.
Faq
When can I get the quotation?
We usually provide you with a quotation within 24 hours after receiving your inquiry. If you urgently need a quote. Please call us or let us know in your email so that we can prioritize your inquiry.
Do you accept small orders?
Don't worry. Please feel free to contact us at any time. In order to obtain more orders and provide our customers with more conveners, we accept small orders.
Can it be customized?
Customization is possible, we have multiple colors and styles, and we only start mass production based on the samples confirmed and signed by you.
Can I visit your factory?
Welcome to our factory. Please contact us first. With your schedule, we will provide you with the necessary services.
GET A FREE QUOTE
If you are interested in our products, please leave your e-mail, we will contact you as soon as possible, thank you!
Contact Us
Advanced Equipment Industrial Park, Beibaibu Village, Luoxi Street, High-tech Industrial Development Zone, Linyi City, Shandong Province, China
Column Menu
